NOTE!

  • You will need to supply your own internet access point for the camera to connect to (such as a pocket WiFi device available from a Telco company).

How to create an account on the BlackVue app

  1. Open the BlackVue app.
  2. Click the menu tab in the top left corner then select Create account.
  3. Fill in the fields with your email address and desired password (the password is case sensitive).
  4. Then agree to the terms & policies and press Create account.
  5. A confirmation email will be sent to your entered email address. Click the link to confirm and finalise the creation of your account.
  6. Open the app, click on the menu tab and select login and enter your account details.

How to register your BlackVue dash camera for the cloud

  1. In the BlackVue app select 'BlackVue Cloud' option up the top.
  2. Choose if you would like to receive push notifications from the BlackVue app (this will include event and parking mode detection alerts).
  3. Select 'Register new camera' option.
  4. Register the camera using on the following options.
    QR Code: Press scan QR code and capture the QR code inside the designated area on your smartphone.

    Manual Registration: Enter your camera's serial number and cloud code and press register (these fields are not case sensitive).


How to configure the Cloud hot-spot settings

  1. After registering your BlackVue dash camera you will need to setup the Cloud hot-spot in the dashcam's firmware settings. Unsure how to access the firmware settings?
  2. Once in the firmware settings, you will need to navigate to the cloud section and enter the hot-spot SSID and password details into the relevant fields (keep in mind that the SSID and password section are case sensitive).
  3. After entering the details save and close the settings and the let the camera reboot.
  4. Once this is complete and the settings have been correctly entered the camera will power up and voice "Cloud connected".